NASA News
Main Mirror for SOFIA Infrared Observatory Receives Finish Coating
MOFFETT FIELD, Calif.,
After years of development and preparation, it took just 20 seconds to apply the shiny aluminum coating to the glass mirror for the Stratospheric Observatory for Infrared Astronomy, or
"The change was quite sudden and stunning," said
"There were quite a few technical challenges that caused us to question whether the coating quality would be this good on the first try. We're ecstatic," said
Project engineers completed the first mirror coating of the German-built telescope, a major project milestone, in a 10-ton, 16-foot tall stainless steel vacuum chamber at Ames.
"The telescope's mirror surface must be highly reflective and clean to ensure the quality of our astronomical observations," said
One of the challenges to a successful coating of the mirror was proper selection and testing of vacuum-compatible materials that support the large structure containing the mirror, known as the mirror cell. According to project scientists, modern telescopes include more of the mirror cell in the coating chamber during the process to simplify telescope disassembly and reassembly.
The SOFIA Primary Mirror Assembly contains 1,950 pounds of glass and more than 2,400 pounds of CFRP. When the mirror and mirror cell were in the coating chamber and air was removed from the chamber, it took nearly a week for the CFRP to release its absorbed moisture, approximately one pint. After the moisture was removed, the pressure in the coating chamber was low enough for the mirror coating process to begin.
The coating chamber vaporizes aluminum by heating more than 60 tungsten filaments around its edges. These filaments have shapes similar to ones found in ordinary light bulbs, but are much larger. Each filament is laced with small twists of 99.999 percent pure aluminum wire.
The aluminum coating applied to the mirror glass is only five one-millionths of an inch thick, approximately 1/300 of the thickness of a human hair, and weighs slightly more than 1/14 of an ounce, equivalent to 1/7 of the metal in a soda can.
For more information about
For information about
PHOTO EDITORS: High-resolution photos to support this release are available electronically at:
http://www.nasa.gov/centers/ames/multimedia/images/
SOURCE NASA
Search Our News Using Google Search
Can't find what you want? Try using Google:



